MA 40 is a hydraulic rock drill (weight 40 kg) to be assembled on drilling slides.

It is the ideal rock drill for block cutters operating on all rocks types. The hydraulic rotation motor, separated from the percussion unit, grants a higher and more constant torque therefore a high drilling speed in deep holes.

The rock drill can work with air or water flushing without any modification. Four fixing points on the main rock drill body allow and easy installation on block cutter.

MA 100 is a roto percussion rock drill with separated hydraulic or pneumatic rotation, left and right, pneumatic percussion.

The rock drill MA 100 is mainly used in the execution of self-drilling anchors. It can work with either air or water flushing, standard threaded rods, or self-anchoring rods with the simultaneous mortar injection (grout).

The pneumatic version can be installed on the whole Marini Quarries Group’s pneumatic range and it needs only an air connection with a compressor to work. The hydraulic rotation version, thanks the hydraulic motor, achieves superior performances in terms of drilling speed and depth but it requires a small power pack to work.

The MA 100 is suitable for drill rods from R25 – R32 – R38, ISCHEBECK Titan 30 – 40 – 52.

MA 100 ID is a hydraulic roto percussion rock drill with separated rotation, left and right.

The rock drill MA 100 ID is mainly used in the execution of self-drilling anchors. It can work with either air or water flushing, standard threaded rods or self-anchoring rods with the simultaneous mortar injection (grout). Its ideal uses are the operation concerning, reinforcement, or anchorage in civil engineering job sites and deep drilling in all lithotype quarries.

The use of the rock-drill MA 100 ID allows to reach high drilling speeds, considerable depths, and record-breaking performance among the drills of the same weight and size.

The MA 100 is suitable for drill rods from R25 – R32 – R38, ISCHEBECK Titan 30 – 40 – 52.

MA 100 2 ID is a hydraulic roto percussion rock drill with separated rotation, left and right.

The rock drill MA 100 2 ID is mainly used in the execution of self-drilling anchors. It can work with either air or water flushing, standard threaded rods or self-anchoring rods with the simultaneous mortar injection (grout). Its ideal uses are the operation concerning, reinforcement, or anchorage in civil engineering job sites and deep drilling in all lithotype quarries.

The use of the rock drill MA 100 2 ID allows to reach high drilling speed, considerable depths, and record-breaking performance among the drills of the same weight and size.

The MA100 2 ID is suitable for drill rods from R25 – R32 – R38 / R51, ISCHEBECK Titan 30 – 40 / 52.

MA 200 is a hydraulic rotary percussion hammer with separate rotation, left and right.

The drifter MA 200 is mainly used in the execution of self-drilling anchors. It can work with either air or water purge with extendable screw rods or bars used to lose self-drilling with the simultaneous release of cement mortar (grout).

Its use is ideal for drilling anchors or consolidations in civil engineering and in deep drilling in the quarries of various rock types.

MA 500 ID is a hydraulic rotary percussion hammer with separate rotation, left and right.

The drifter MA 500 ID is mainly used in the execution of self-drilling anchors. It can work with either air or water purge with extendable screw rods or bars used to lose self-drilling with the simultaneous release of cement mortar (grout).

Its use is ideal for drilling anchors or consolidations in civil engineering and in deep drilling in the quarries of various rock types.

MA 500 2 ID is a hydraulic rotary percussion hammer with separate rotation, left and right.

The perforator MA 500 2 ID is mainly used in the execution of self-drilling anchors. It can work with either air or water purge with extendable screw rods or bars used to lose self-drilling with the simultaneous release of cement mortar (grout).

Its use is ideal for drilling anchors or consolidations in civil engineering and in deep drilling in the quarries of various rock types.